Multi-Layer Plastic Extruder (PP, PS, HIPS, PE Sheet Extrusion)
Sigar Fasaha
WSJP120/90/65-1000 Multi-Layer Plastic Extruder (PP, PS, HIPS, PE Sheet Extrusion)
| Lambar Layer | Ƙayyadaddun dunƙule | Kaurin takarda | Fadin takarda | Ƙarfin fitarwa | Ƙarfin da aka shigar |
| mm | mm | mm | kg/h | kW | |
| <5 | Φ120/Φ90/Φ65 | 0.2-2.0 | ≤880 | 300-800 | 380 |
Siffar
1. The guda dunƙule filastik extruder a cikin masana'antu line rungumi dabi'ar sabon nau'in dunƙule tsarin featured a matsayin barga ciyar da uniform fusion hadawa, wanda zai iya rage makamashi amfani da kuma ƙara samar da fitarwa.
2. Ƙwararren filastik yana ɗaukar haɗin kai tsaye tsakanin motar motsa jiki da raguwa, wanda zai iya inganta ingantaccen watsawa da kuma rage saurin saurin gudu yana tabbatar da kwanciyar hankali na extrusion.
3. The extruder da aka tsara tare da narke dosing famfo kuma shi za a iya hadin gwiwa tare da madaidaici Multi-Layer rarraba.Matsakaicin magudanar ruwa da rabon share ruwan ruwa duk daidaitacce ne, wanda zai iya haifar da ƙarin yumɓun takardar filastik iri ɗaya.
4. Jimlar na'ura tana ɗaukar tsarin kula da PLC, wanda zai iya gane sarrafawa ta atomatik don saitin siga, aiki na kwanan wata, amsawa, ƙararrawa da sauran ayyuka.
Amfani
A tsakiyar wannan ƙirƙira ta ta'allaka ne da sabon ƙirar filastik ɗin mu da aka ƙera.Ƙararren ƙirar sa na musamman yana tabbatar da bargaciyar ciyarwa da narke iri ɗaya, yana haifar da ingantaccen ingancin samfur.Wannan sabon fasalin ba wai kawai yana rage yawan amfani da makamashi ba, har ma yana ƙara yawan fitarwa.Tare da mu Multi-Layer filastik extruders, za ka iya yanzu cimma mafi girma yawan aiki ba tare da compromi samfurin ingancin da daidaito.
Wani abin lura shine haɗin kai tsaye tsakanin motar da raguwar kayan aiki.Wannan haɗin kai tsaye yana inganta ingantaccen watsawa kuma yana rage saurin saurin gudu, yana tabbatar da ingantaccen tsari na extrusion.Ta hanyar kawar da jujjuyawar da ba'a so, masu fitar da robobi na mu na yau da kullun suna ba da garantin daidaitaccen aiki, rage ƙarancin lokaci da haɓaka yawan aiki.Shaida tsarin extrusion mara kyau, mara yankewa kamar ba a taɓa gani ba.
Don ƙara haɓaka aikin aiki, na'urorin mu na filastik masu yawa suna sanye da ingantattun famfun narke mai narke.Wannan ƙari mai wayo yana aiki ba tare da matsala ba tare da daidaitaccen tsarin daidaitawa don haɓaka rarraba kayan aiki da rage sharar gida.Ayi bankwana da abubuwan da suka wuce gona da iri kuma sannu a hankali samarwa mai tsada.
Ƙaƙƙarfan kayan aikin filastik mu multilayer ba shi da iyaka.Injin yana iya sarrafa nau'ikan kayan filastik da suka haɗa da PP, PS, HIPS da PE don saduwa da buƙatun masana'antu daban-daban.Ko kuna samar da kayan marufi, kayan gini ko sassa na mota, fitattun fitattun filastik ɗin mu suna tabbatar da kyakkyawan sakamako kowane lokaci.
